Fiat 125

Thursday 13 May 2021

The Fiat 125 is a large family car manufactured and marketed by Fiat from 1967-1972. Derivatives were built under license outside Italy until the 1990s. As launched the car was unusual in blending saloon car passenger accommodation with sports car performance, a combination which would be more widely adopted by the European volume auto-makers in the decade ahead.

The floor pan was virtually unchanged from that of the longer variant of the outgoing model, the Fiat 1300/1500, and the chassis used was the same as the Fiat 1300/1500. The body was a slightly lengthened development of the Fiat 124: both models shared the same passenger compartment and doors, but the 125's rear seat was set slightly further back, reflecting the 2505 mm wheel-base, inherited from the Fiat 1500 and over 8 cm (3 inches) longer than that of the 124.

The new car's engine was based on the one fitted in the Fiat 124 Sport: a 1608 cc DOHC unit with 90 bhp driving the rear wheels. The 125 was equipped with a Weber 34 DCHE 20 or Solex 34 PIA carburettor. The car was fitted with an alternator, reflecting the twin headlights and the increasing number of energy intensive electrical components appearing on cars at this time. Other noteworthy features included the electromagnetic cooling fan clutch.

The 125 featured one of the world's first intermittent wipers and was praised when new for its handling and dynamics. British Autocar found the slight understeer tendencies were easily cured by adjusting the front camber.

In 1968 the 125S ("Special") was added to the range, with 100 bhp (from a modified cylinder head, camshafts, inlet/outlet manifold and Weber/Solex carburettor) and, unusually at this time, a five-speed gearbox. It also had halogen lights, servo-assisted twin circuit brakes and optional superlight magnesium wheels. A variety of other improvements were made including improved cabin ventilation, trim and styling.

The Special was facelifted in 1971 using pretty much the same trim as the 125S, but both front and rear lights were new and wider, enhancing the visual width of the car. The interior gained upgraded upholstery of the seats and a wood facia. A three-speed automatic transmission as well as air conditioning became available as an option.

In Argentina the 125 was built from 1972 to 1982, initially by Fiat-Concord and later Sevel. In addition to the 4-door sedan version, a station wagon (called "Familiar"), a pickup (called "Multicarga", a unique Argentine design) were built. There was also a coupe called 125 Sport with the same mechanics than the sedan, but based on the Fiat Coupé 1500 Vignale.

Technical data:

- engine: S4

- capacity: 1608 cc

- horsepower: 90 HP

- gearbox: 4+1

- top speed: 150 km/h

Fiat Tipo

Thursday 26 December 2019
This is a 3 door version of the vehicle described here.









Technical data:
- engine: 4 cylinders
- capacity: 1581 cc
- horsepower: 89 HP
- gearbox: 5+1
- top speed: 175 km/h

Fiat 1500

Tuesday 5 July 2016
The Fiat 1300 and Fiat 1500 are automobiles which were manufactured by the Italian automaker Fiat from 1961 to 1967. They replaced the Fiat 1200. The 1300 and 1500 were essentially identical except for their engine displacement, as indicated by their model names. They were available as a saloon and estate, and as convertible and coupé models which shared little mechanically with the other body styles except the 1500 engine.
The car's 75 hp engine combined with its lightweight construction was unusual for the time, especially when considering the price. Front wheels were equipped with disc brakes with four-pot calipers while rear brakes were alloy drums.
The 1300/1500 and their derivatives were also assembled by Yugoslavia's Zastava and Fiat's German subsidiary, Neckar Automobil AG, as well as in South Africa. The floorpan of the 1500C was used as a basis for the 1500s replacement, the Fiat 125, while another model, the Polski Fiat 125p, made by the Polish FSO, was created by mating the body of 125 and mechanicals (engines, gearbox, transmission, suspension) of 1300/1500. In the Italian range, the 1300 was replaced by the Fiat 124 in 1966, and the 1500 by the Fiat 125 a year later.
In total, 1,900,000 units were produced worldwide.
The Pininfarina-designed Coupé and Cabriolet models of the preceding 1200 continued with largely unchanged bodywork, although they were now equipped with the larger 1.5 litre engine. The grille, previously in two segments, was now a wider single-piece unit of a more trapezoidal design. The O.S.C.A. engined 1600 S, with a twin cam 1568 cc engine developing 90 PS (66 kW) continued to be available albeit with the same new front end treatment as that of the 1500 Cabriolet. This was called the Fiat 1600 S Coupé/Cabriolet and can easily be recognized by its additional lamps at the outer corners of the grille. All of the coupés and convertibles were replaced by the new 124 coupés and spiders in 1966.
The New Zealand importer, Torino Motors, marketed the 1500 as the "Crusader", with corresponding badging. In South Africa, dealers could also supply the "1500 OTS", a conversion for more power available in two different stages. The OTS was developed by CMI (Cartoria Motor Industries) specifically to suit local production car competition regulations. Rather than the standard car's 83 bhp (62 kW) SAE, the OTS developed 96 and 108 bhp (72 and 81 kW) SAE in the respective Stage I and Stage II variants. A variety of extras were also offered, including lowered suspension and a conversion to a floor-mounted shifter.

Technical data:
- engine: 4 cylinders
- capacity: 1481 cc
- horsepower: 73 HP
- gearbox: 4+1
- top speed: 155 km/h

Fiat 600

Sunday 7 February 2016
The Fiat 600 (Italian: Seicento, pronounced say-chento) is a city car produced by the Italian manufacturer Fiat from 1955 to 1969. Measuring only 3.22 m (10 ft 7 in) long, it was the first rear-engined Fiat and cost the equivalent of about €6,700 or US$7300 in today's money (590,000 lire then). The total number produced from 1955 to 1969 at the Mirafiori plant in Turin was 2,695,197. During the 1960s, '70s and '80s, the car became very popular in countries such as Spain (as SEAT 600), where it became the icon, par excellence, of the Spanish miracle, Argentina, where it was nicknamed Fitito (a diminutive of FIAT) and former Yugoslavia where it was nicknamed Fićo (pronounced [fee-cho]).
Codenamed Progetto 100 ("Project 100"), the Fiat 600 mirrored the layout of the Volkswagen Beetle and Renault 4CV of its era. Aimed at being an economical but capable vehicle, its design parameters stipulated a weight of around 450 kg with the ability to carry 4 people and luggage plus a cruising speed of no less than 85 km/h. A total of 5 prototypes were built between 1952 and 1954, which all differed from one another. Chassis number 000001 with engine number 000002 is believed to be the sole remaining example, according to a recent report by Quattroruote's "Ruoteclassiche" vintage division. It was powered by an innovative single-cam V2-cylinder engine designed to simplify maintenance and did not feature a clutch pedal. At the official launch in 1955, FIAT engineer, Dante Giacosa declared that the aim had been to create something new, both in the interest of progress and simplification. This prototype, however, did not become the chosen design.
The car had hydraulic drum brakes on all four wheels. Suspension was a unique single double-mounted leafspring—which acts as a stabilizer—between the front wheels coupled to gas-charged shock absorbers, and an independent coil-over-shock absorber setup coupled to semi-trailing arms at the rear. All 600 models had 3-synchro (no synchro on 1st) 4-speed transaxles. Unlike the Volkswagen Beetle or Fiat 500, the Fiat 600 is water-cooled with an ample cabin heater and, while cooling is generally adequate, for high-power modified versions a front-mounted radiator or oil cooler is needed to complement the rear-mounted radiator. All models of the 600 had generators with mechanical external regulators.
The top speed ranged from 95 km/h (59 mph) empty with the 633 cc inline-four engine to 110 km/h (68 mph) with the 767 cc version. The car had good ventilation and defrosting systems.
A year after its debut, in 1956, a soft-top version was introduced, as well as a six-seater variant—the Fiat 600 Multipla. It was a precursor of current multi-purpose vehicles.
Retrospectively the water-cooled Fiat 600 is sometimes over-shadowed by the air-cooled Fiat 500, but the 600 was a remarkably fast seller in its time: the millionth 600 was produced in February 1961, less than six years after the car's launch. At the time when the millionth car was produced, the manufacturer reported it was producing the car at the then remarkable rate of 1,000 a day. As of 2011 there are only 65 left in the UK that are road legal.

Technical data:
- engine: 4 cylinders
- capacity: 633 cc
- horsepower: 22 HP
- gearbox: 3+1
- top speed: 95 km/h

Introzzi Fiat 130

Monday 25 January 2016
The Fiat 130 is a large six cylinder executive car produced by Italian car manufacturer Fiat from 1969 to 1977. It was available as a 4-door saloon and as a 2-door coupé.
The saloon was launched at the 39th Geneva Motor Show in March 1969, replacing the previous largest and most exclusive Fiat saloon, the Fiat 2300. It was a thoroughly modern car, with four-wheel independent suspension (torsion bars in the front and coil springs in the rear), standard power steering and four-wheel disc brakes, and was the first Fiat to adopt an alternator instead of a direct-current generator.
The Coupé, based on the same platform, was introduced in March 1971 having been designed by Paolo Martin of Pininfarina, who also manufactured the car. With a unique interior design (adopted in the saloon when it was upgraded to the 130B version which also featured the Coupé's enlarged 3235 cc V6), it featured a button-operated mechanism allowing the driver to open the passenger-side door. In addition to this model, there were two one-off variations built, a 2-door estate named Maremma and a 4-door saloon named Opera.
Production of the saloon ended in 1976, with 15,093 produced. The Coupé continued until the following year, and 4,294 were built in total.
Launched in 1969, with the 2866 cc 140 bhp (104 kW; 142 PS) engine. The press soon concluded that the 140 bhp (104 kW; 142 PS) was insufficient in view of the weight of about 1,600 kg (3,527 lb), hence the Fiat 130 berlina type "A" did not compete with the big BMW and Mercedes sedans. Interior design was not ambitious, with rectangular dials in the dashboard, a black plastic centre console and black plastic everywhere.
These cars were improved in 1971, taking on board some Paolo Martin innovations conceived for the Coupé. The steering column, the dashboard, the central console and the ventilation are identical to the Coupé. The seats, the steering wheel and the door panels were improved, but differently from the Coupé. One can say the 1971 "B" version from 1971 is significantly more refined than the "A" version dating from 1969. Retrospectively, if one compares the 130 with big BMW and Mercedes sedans, the Fiat 130 Berlina type "B" may be the winner in terms of interior design and some comfort elements. But if one is considering the dynamic elements like power and ride comfort, the Fiat 130 type "B" is still lagging as the engine is not blessed with fuel injection (somewhat difficult to start—depending on the conditions), the engine does not have hydraulic self-adjusting valves, and the engine is simply not powerful enough. All this combines with a worryingly high fuel consumption. And this lack of dash and lack of efficiency are not compensated for with an extra smooth ride.
This is a model of station wagon version made by style studio Introzzi.

Technical data:
- engine: V6
- capacity: 3235 cc
- horsepower: 165 HP
- gearbox: 5+1
- top speed: 200 km/h

Fiat Panda Moretti

Thursday 13 August 2015
This is a modified version of the car described here. The modifications were made by Moretti studio. Looks good?

Technical data:
- engine: 4 cylinders
- capacity: 999 cc
- horsepower: 45 HP
- gearbox: 4+1
- top speed: 145 km/h

Fiat 500

Thursday 13 August 2015
No need to say anything. Just another version of one of the most popular cars in the world. Details here!

Technical data:
- engine: 2 cylinders
- capacity: 500 cc
- horsepower: 24 HP
- gearbox: 4+1
- top speed: 100 km/h

Fiat 238

Sunday 17 May 2015
Fiat 238 was a van produced by the Italian automotive production firm Fiat from 1967 through 1983. The van was introduced in 1967 as the logical successor for the Fiat 1100T. The 238 was based on the chassis of the Autobianchi Primula. The 238 was produced in many different body styles for utility and personnel transport. In 1974 Fiat introduced a new van, the 242 with a larger petrol engine and also a diesel engine variant. Despite that the sales of Fiat 238 did not weaken and Fiat decided to keep it in its lineup, and made the new bigger engine also available to the 238 model. The 238 was produced until 1983 and was replaced with Ducato.

Technical data:
- engine: 4 cylinders
- capacity: 1438 cc
- horsepower: 45 HP
- gearbox: 4+1
- top speed: 90 km/h