Plymouth Fury

Wednesday 5 Ma 2021

The Plymouth Fury is a model of automobile which was produced by Plymouth from 1955 to 1989. It was introduced for the 1956 model year as a sub-series of the Plymouth Belvedere, becoming a separate series one level above the contemporary Belvedere for 1959. The Fury was a full-size car from 1959 to 1961, then a mid-size car from 1962 to 1964, again a full-size car from 1965 to 1974, and again a mid-size car from 1975 to 1978. From 1975 to 1977 the Fury was sold alongside the full-size Plymouth Gran Fury. In 1978, the B-body Fury was the largest Plymouth, and by 1979, there was no large Plymouth. This was rectified in 1980 with the R-body Gran Fury, followed by the M-body Fury in 1982. Production of the last V8, RWD Plymouth Fury ended at Kenosha, WI, on December 23, 1988. Unlike its sibling brand, Dodge, Plymouth would not live to see the resurgence of the large, V8/RWD sedan. The last Plymouth rolled off the Belvedere assembly line in 2001.

For the 1975 model year, Chrysler moved the Fury name, which had been part of the full-size C-body Plymouth model line up during the previous ten model years, over to the restyled mid-size B-body line, which had been marketed as the Satellite previously. The "Road Runner" was offered as the top-of-the-line model of the redesigned Plymouth Fury 2-door line up, then it was moved over to the Plymouth Volare line up during the following model year (1976). The full-size Plymouth, now known as the Plymouth Gran Fury, lasted through 1977. The entire mid-size Plymouth Fury line up was discontinued at the end of the 1978 model year, replaced in Canada by the rebadged Dodge Diplomat model called the Plymouth Caravelle (not to be confused with the E-body Plymouth Caravelle from 1983 to 1988 and the 1985 to 1988 Plymouth Caravelle for the American car market). During the entire 1979 model year, there were no Fury offerings from Plymouth at all.

Only minor styling changes occurred from the 1975 to the 1978 model years, most notably, during the 1977 model year when quad stacked square headlights (see photo) replaced the previous round dual beam headlights, the front turn signals, previously on the outboard edges of the grille, were moved over to the cutouts in the front bumper. Tail lights received amber turn signal lenses in place of the previous red turn signal lenses. Various 2-door models had no centerposts and some of them were true hardtops with roll-down rear windows. Other two-door models had fixed rear windows even though they had no centerposts. For the most part, the Plymouth Fury two-door models, during the 1975 and the 1978 model years, were labeled as "hardtops".

The Plymouth Fury, 1975-1978, shared its B-body and unibody structure with the Dodge Coronet (1975-1976), Dodge Monaco (1977-1978) and the corporation's new personal-luxury coupe models, Chrysler Cordoba (1975-1979) and Dodge Charger SE (1975-1978). All the four-door models, wagons and sedans alike, continued with the basic body shells, which date back to the start of the 1971 model year, rode on a 118 in (2,997 mm) wheelbase, while the various two-door models—which were restyled with new and more formal sheetmetal and rooflines—rode on the 115 in (2,921 mm) wheelbase.

Before 1975, the Plymouth Satellite had a 117 in (2,972 mm) wheelbase, while the Dodge Coronet had a 118 in (2,997 mm) wheelbase. For 1975, the mid-size Plymouth Fury had a 117.5 in (2,984 mm) wheelbase and the 1975 Dodge Coronet had the same wheelbase.

Before 1974, the Plymouth Fury had a 120 in (3,048 mm) wheelbase, while the Dodge Monaco/Polara had a 122 in (3,099 mm) wheelbase. For 1974, the Plymouth Gran Fury and Dodge Monaco had the same 121.5 in (3,086 mm) wheelbase.

Fury was offered in three basic subseries for 1975 in sedans and coupes and two for the station wagon. The sedan was offered in base, custom and salon models, with interior and exterior trim ranging from austere to luxurious. The salon featured plush velour bench seats with recliners and folding armrests and carpeted trunks, along with a spring-loaded hood ornament with the Plymouth logo. In addition to the Road Runner, the Fury coupes were offered in base, Custom and Sport models. The "sport" was the top-line coupe featuring body pinstriping on the upper door and front and rear fenders, interiors with all-vinyl bucket seats and center cushion and armrest, or optional center console; or split bench seats with armrest, along with plusher shag carpeting on floor and door panels plus lower door carpeting. The wagons were available as either the Fury Suburban or Fury Custom Suburban.

Engine offerings included the 225 cu in (3.69 L) slant-six that was standard on all models except Fury Sport, Road Runner, and station wagons, which came with the 318 cu in (5.21 L) V8 as the base engine which was optional on other models. Optional engines on all models included 360 cu in (5.9 L) and 400 cu in (6.6 L) V8s with two- or four-barrel carburetor, and the 440 cu in (7.2 L) four-barrel was only as a "police" option on four-door sedans. A three-speed manual transmission was standard with the automatic TorqueFlite optional.

The 1976 model year mid-size B-body 1976 Plymouth Fury saw very few appearance changes from the previous year other than the availability of a dual opera window roof on Sport Fury two-door models. Engine and transmission offerings were also unchanged except that the 360 two-barrel V8 was now the standard engine on station wagons along with the TorqueFlite automatic transmission, both items of which were optional on other models.

The 1977 model year mid-size B-body 1977 Plymouth Fury received a new front end with a chrome vertical bar grille and outline along with stacked rectangular headlights. Model and drivetrain offerings were unchanged from 1976 except that the Slant Six now had two-barrel carburetion replacing the one-barrel pot of previous years and was now standard on the Sport Fury two-door models. Optional V8 engines included the 318 two-barrel, 360 two- or four-barrel and 400 two- or four-barrel. The 440 four-barrel V8 was only offered in four-door models as part of the police package.

The 1978 model year was technically a mid-size B-body car, but the 1978 Plymouth Fury was Plymouth's largest car with the discontinuation of the full-size C-body Plymouth Gran Fury after 1977. TorqueFlite automatic transmission and power steering were now standard on all Fury models and the same selection of V8 engines was still available. Few appearance changes were made from the previous model year. The 1978 was the last model year for the Plymouth Fury and its Dodge Monaco counterpart, which was renamed as such during the start of the previous model year (1977), which, in turn, was called the "Dodge Coronet" (from 1965, 1966 to 1967, 1968 to 1970, 1971 to 1974 and from 1975 on through to 1976), while the former full-size C-body Dodge was renamed the "Dodge Royal Monaco" during the start of the previous model year (1977) up until it was discontinued after just one model year. The personal-luxury coupes, which were based on the mid-size B-body platform, including the Chrysler Cordoba and Dodge Magnum (renamed from Charger in 1978) would soldier on for one more year until they were downsized (and renamed Mirada for the Dodge version) in 1980 to the M-body platform used for the Dodge Diplomat and Chrysler LeBaron.

Technical data:
- engine: V8
- capacity: 5900 cc
- horsepower: 200 HP
- gearbox: 4+1
- top speed: 170 km/h

Plymouth Belvedere GTX

Monday 26 April 2021

The Plymouth GTX is an automobile introduced as the Belvedere GTX in 1967 by the Plymouth division. It was positioned as a mid-sized upscale-trimmed performance muscle car through the 1971 model year.

The GTX was based on the Belvedere, and was differentiated by a blacked out grille and special rear fascia, fiberglass simulated hood scoops with optional racing stripes, a chrome "pop-open" fuel filler cap, and a tachometer mounted on the center console.

The GTX was positioned as a "gentleman's muscle car". Standard was Plymouth's 440 cu in (7.2 L) V8 engine called the "Super Commando 440" rated at 375 hp (280 kW). Optional was Chrysler's 426 cu in (7.0 L) Hemi. A heavy duty suspension system was also standard.

Technical data:
- engine: V8
- capacity: 7200 cc
- horsepower: 375 HP
- gearbox: 3+1
- top speed: 180 km/h

Ford F100

Sunday 25 April 2021

This is 1/18 scale version of the vehicle described here. Made by Greenlight as a replica of the car seen if first series of the Walking DeaD.

Technical data:
- engine: V6
- capacity: 4900 cc
- horsepower: 170 HP
- gearbox: 4+1
- top speed: 150 km/h

Dodge Charger 500

Tuesday 24 December 2019
During the early-1960s, automakers were exploring new ideas in the personal luxury and specialty car segments. Chrysler, fast to enter the specialty car market, selected their Dodge Division to enter the marketplace with a bigger model to fit between the "pony car" Ford Mustang and the "personal luxury" Ford Thunderbird. The intention was to use the B-body for a sporty car with fastback look while sharing as much of their existing hardware as possible.

The fastback Charger was introduced in mid-season of the 1966 model year "in retaliation to the AMC Marlin, Ford Mustang, and Plymouth Barracuda", but even though based on the existing Coronet, "it was style-wise a complete departure from the Dodge's mainstream cars." The 1965 Rambler Marlin, along with the Dodge Charger that arrived during the 1966 model year, were "the two cars set the standard for radical fastback design in American mid-size automobiles." According to Richard M. Langworth, "because it was an intermediate like the Rambler Marlin, the Charger could have been an aesthetic disaster, but long side windows prevented its sweeping roof from looking too heavy."

Burt Bouwkamp, Chief Engineer for Dodge during the 1960s and one of the men behind the Dodge Charger, related his experience during a speech in July 2004. Lynn Townsend was at odds with the Dodge Dealers and wanted to do something to please them. So in 1965 he asked me to come to his office - for the second time. He noted that one of the Dodge Dealer Council requests was for a Barracuda type vehicle. The overall dealer product recommendation theme was the same - we want what Plymouth has. The specific request for a Mustang type vehicle was not as controversial to Lynn. His direction to me was to give them a specialty car but he said 'for God's sake don't make it a derivative of the Barracuda': i.e. don't make it a Barracuda competitor. So the 1966 Charger was born."We built a Charger 'idea' car which we displayed at auto shows in 1965 to stimulate market interest in the concept. It was the approved design but we told the press and auto show attendees that it was just an "idea" and that we would build it if they liked it. It was pre-ordained that they would like it."

The entire B-body lineup for the 1968 model year was redesigned and the Charger was further differentiated from the Dodge Coronet models. Designer Richard Sias developed a double-diamond coke bottle profile with curves around the front fenders and rear quarter panels. Front and rear end sheet metal was designed by Harvey J. Winn. The rear end featured a "kick up" spoiler appearance, inspired by Group 7 racing vehicles. On the roof, a "flying buttress" was added to give the rear window area a look similar to that of the 1966-67 Pontiac GTO. The Charger retained its full-width hidden headlight grille, but a vacuum operated cover replaced the electric motor rotating headlights. The previous full-width taillights were replaced with dual circular units at the direction of Styling Vice President, Elwood P. Engel. Dual scallops were added to the doors and hood.

Inside, the interior was new with a conventional fixed rear seat replacing the folding bucket seat design. The conventional trunk area included a vinyl mat, rather than the previous model's carpeted cargo area. The center console in the front remained, but there was no center armrest. The tachometer was now optional instead of standard and the electroluminescent gauges disappeared in favor of a conventional design.

The standard engine was the 318 cu in (5.2 L) 2-bbl V8, until it was replaced in mid-year with a 225 cu in (3.7 L) slant-six. The 383-2 and 383-4 remained unchanged. A new high-performance package was added, the R/T ("Road/Track" with no 'and' between Road and Track). The R/T came standard with the previous year's 440 "Magnum" and the 426 Hemi was optional.

In 1968, Chrysler Corporation began an ad campaign featuring a cartoon bee with an engine on its back featuring models called the "Scat Pack". The Coronet R/T, Super Bee, Dart GTS, and Charger R/T received bumble-bee stripes (two thin stripes framing two thick stripes). The stripes were standard on the R/Ts and came in red, white, or black, but could be deleted at no extra cost.

The 1968 model year Charger sales increased to 96,100, including over 17,000 Charger R/Ts.

The Charger was changed slightly for the 1970 model year. This would be the last year of the 2nd generation Charger and featured a large wraparound chrome bumper and the grille was no longer divided in the middle. New electric headlight doors replaced the old vacuum style. The taillights were similar to those used in 69, but 500 and R/T models came with a new more attractive taillight panel. On the R/T, new rear-facing scoops with
the R/T logo were mounted on the front doors, over the door scallops. A new 440 or HEMI hood cutout made the option list for this year only.

Dodge painted the hood scallop inserts black and put the silver engine callouts on top. New "High Impact" colors were given names, such as Top Banana, Panther Pink, Sublime, Burnt Orange, Go Mango and Plum Crazy (sometimes nicknamed "Statutory Grape"). The 500 returned for another year, but as a regular production Charger. Interior changes included new high-back bucket seats, the door panels were also revised and the map pockets were now optional instead of standard. The ignition was moved from the dash to the steering column (as with all Chrysler products this year), and the glove box was now hinged at the bottom instead of the top as in 1968-69. The SE
"Special Edition" trim option added luxury features and was available in as the 500 SE and R/T SE models. The all new pistol grip shifter was introduced, along with a bench seat, a first for the Charger since its debut.

A new engine option made the Charger's list for the first time, the 440 Six Pack. With three two-barrel carburetors and a rating of 390 hp (290 kW), it was one of the most exotic setups since the cross-ram Max Wedge engines of the early 1960s. The Six Pack was previously used on the mid-year 1969 Dodge Super Bee and Plymouth Road Runner. Despite this new engine, production slipped again to 46,576 mainly due to the new E-body Dodge Challenger pony car, as well as rapidly increasing automobile insurance rates. In the 1970 NASCAR season, the 1970 Charger had ten wins, more than any other car, including the 1969 Dodge Charger Daytonas and Plymouth Superbirds, thus giving Bobby Isaac the Grand National Championship.

Technical data:
- engine: V8
- capacity: 5200 cc
- horsepower: 390 HP
- gearbox: 4+1
- top speed: 210 km/h

Dodge Charger R/T

Sunday 10 July 2016
The Dodge Charger (B-body) is a mid-size automobile that was produced by Dodge from 1966 to 1978, and was based on the Chrysler B platform.
The entire B-body lineup for the 1968 model year was redesigned and the Charger was further differentiated from the Dodge Coronet models. Designer Richard Sias developed a double-diamond coke bottle profile with curves around the front fenders and rear quarter panels. Front and rear end sheet metal was designed by Harvey J. Winn. The rear end featured a "kick up" spoiler appearance, inspired by Group 7 racing vehicles. On the roof, a "flying buttress" was added to give the rear window area a look similar to that of the 1966-67 Pontiac GTO. The Charger retained its full-width hidden headlight grille, but a vacuum operated cover replaced the electric motor rotating headlights. The previous full-width taillights were replaced with dual circular units at the direction of Styling Vice President, Elwood P. Engel. Dual scallops were added to the doors and hood.
Inside, the interior was new with a conventional fixed rear seat replacing the folding bucket seat design. The conventional trunk area included a vinyl mat, rather than the previous model's carpeted cargo area. The center console in the front remained, but there was no center armrest. The tachometer was now optional instead of standard and the electroluminescent gauges disappeared in favor of a conventional design.
The standard engine was the 318 cu in (5.2 L) 2-bbl V8, until it was replaced in mid-year with a 225 cu in (3.7 L) slant-six. The 383-2 and 383-4 remained unchanged. A new high-performance package was added, the R/T ("Road/Track" with no 'and' between Road and Track). The R/T came standard with the previous year's 440 "Magnum" and the 426 Hemi was optional.
In 1968, Chrysler Corporation began an ad campaign featuring a cartoon bee with an engine on its back featuring models called the "Scat Pack". The Coronet R/T, Super Bee, Dart GTS, and Charger R/T received bumble-bee stripes (two thin stripes framing two thick stripes). The stripes were standard on the R/Ts and came in red, white, or black, but could be deleted at no extra cost.
The 1968 model year Charger sales increased to 96,100, including over 17,000 Charger R/Ts.
In 1968, the NASCAR inspired Charger R/T failed to beat the Ford cars (the Ford Torino Talladega and the Mercury Cyclone Spoiler II) on the high-banks oval-tracks. Wind tunnel tests showed the tunneled rear window caused lift and the gaping mouth induced drag. As a result, Dodge made the rear window flush with the rest of the roof and put a 1968 Coronet grille in the front.
The original Charger 500 prototype was a 1968 Charger R/T with a 426 Hemi and automatic transmission. The prototype was painted in B5 Blue with a white stripe, as well as a white interior. The Charger 500 was one of three models introduced in September 1968. Standard engine was the 440 Magnum, but factory literature claims the 426 Hemi was standard. The Charger 500 had the Torqueflite standard and the same equipment standard as the R/T.
A total of 500 Charger 500s were made, of which only 67 had the 426 Hemi engine; 27 with a 4-speed and 40 with an automatic transmission.

Technical data:
- engine: V8
- capacity: 6300 cc
- horsepower: 330 HP
- gearbox: 4+1
- top speed: 210 km/h

Dodge Charger Daytona

Friday 13 May 2016
Dodge, an American automobile brand, produced three separate vehicles with the name Dodge Charger Daytona, all of which were modified Dodge Chargers. The name is taken from Daytona Beach, Florida, which was an early center for auto racing and still hosts the Daytona 500, one of NASCAR's premier events. The first use of the Daytona name on a car was on a version of the Studebaker Lark. The Daytona was the performance model of the compact Lark and it was produced from 1963–1966.This vehicle has also starred in the BlockBuster action film, Fast and Furious 6.
With the failure of the 1969 Dodge Charger 500 on the highbanks of the superspeedways (tracks of a mile, or more in length), the 1969 Dodge Charger Daytona was created. It was intended to be a high-performance, limited-edition version of the Dodge Charger produced in the summer of 1969 for the sole purpose of winning high profile NASCAR races. It won its first race out, the inaugural Talladega 500 in the fall, although it was a rather hollow victory as all of the top names had left the track on Saturday in a boycott of the 1969 Talladega race. Buddy Baker in the #88 Chrysler Engineering Dodge Charger Daytona was the first driver in NASCAR history to break the 200 mph mark on March 24, 1970 at Talladega. The 1969 Dodge Daytona won two races in 1969 and another four in 1970 for a total of 6. Its successor, the 1970 Plymouth Superbird, won 8 races - all in 1970. (In a bit of irony, in 1969 a Daytona won at Talladega, and a Ford Torino Talladega won at Daytona.) These compare with 29 NASCAR victories for the 1969 Ford Torino Talladega, and 8 for the 1969 Mercury Cyclone Spoiler II. The 1969 Dodge Charger 500 managed to win 22 NASCAR races over the 1969 and 1970 seasons; however, all but one of those victories came on the short tracks - several of which were still being run on dirt at the time.
One of the four famous aero-cars, the Dodge Daytona had featured special body modifications that included a 23-inch-tall (584 mm) stabilizer wing on the rear deck, a special sheet-metal "nose cone" that replaced the traditional upright front grille, a flush rear backlight (rear window area), a 'window cap' to cover the original Charger's recessed rear window, specific front fenders and hood that were modeled after the upcoming 1970 Charger, stainless steel A-pillar covers and fender mounted tire clearance/brake cooling scoops. The Daytona was built on the 1969 Charger's R/T trim specifications, meaning that it carried a heavy-duty suspension and brake setup and was equipped with a 440 CID Magnum engine as standard. Of special note to collectors is the optional 426 CID Hemi V8 engine, which only 70 of the 503 Daytonas carried. It had a corporate cousin in the "one year-only" 1970 Plymouth Superbird.
The "Winged Warriors", as they were affectionately known, did not compete for long in NASCAR's top Cup series. Because of their exceptional speed and performance, NASCAR subsequently changed the rule book, effectively banning all five of the Aero Cars from Dodge, Ford, Mercury, and Plymouth from competition by the end of 1970. See also Plymouth Superbird, Ford Torino Talladega and Mercury Cyclone Spoiler II for additional information about the aero cars.
The Dodge Daytona is now a very rare and valuable collectible, with 440-powered Daytonas reaching into six-figure territory and 426 hemi-engined cars passing the $300,000.00 mark. The "Super Charger IV EL", which looked like a roadster prototype spin-off of the Charger Daytona minus the roof and spoiler, is seen as a pimp-mobile in the 1974 film Truck Turner. Actually, it was just an older Charger show car updated with a SuperBird nose.
A car resembling the Daytona appeared in Universal Studio's 2013 action movie Fast & Furious 6. According to the story line of the film it was an ultra-expensive original Hemi Daytona that had been modified into a pro touring super car. It was driven aggressively by the character Domenic Toretto played by Vin Diesel. In truth, the vehicles used in filming were actually regular 1968 to 1970 chargers with nose pieces and spoilers welded on. They used Chevrolet Racing crate motors and Brembo racing brakes to create a versatile stunt car. The car gets heavily damaged at the end of the film.

Technical data:
- engine: V8
- capacity: 7200 cc
- horsepower: 425 HP
- gearbox: 4+1
- top speed: 220 km/h

Chevrolet Chevelle SS

Sunday 8 May 2016
The Chevrolet Chevelle is a mid-sized muscle car which was produced by Chevrolet in three generations for the 1964 through 1977 model years. Part of the General Motors (GM) A-Body platform, the Chevelle was one of Chevrolet's most successful nameplates. Body styles include coupes, sedans, convertibles and station wagons. Super Sport versions were produced through the 1973 model year, and Lagunas from 1973 through 1976. After a three-year absence, the El Camino was reintroduced as part of the new Chevelle lineup. The Chevelle also provided the platform for the Monte Carlo introduced in 1970. The Malibu, the top of the line model through 1972, replaced the Chevelle nameplate for the redesigned, downsized 1978 models.
The 1968 Chevelle got an all-new distinctly sculpted body with tapered front fenders and a rounded beltline. The car adopted a long-hood/short-deck profile with a high rear-quarter "kick-up". While all 1967 Chevelle models rode a 115-inch (2,900 mm) wheelbase, the 1968 coupes and convertibles now rode a sporty 112-inch (2,800 mm) wheelbase. The sedans and wagons turned to a 116-inch (2,900 mm) span. Tread width grew an inch front and rear. Hardtop coupes featured a semi-fastback, flowing roofline. Top-trim models (including the SS 396 and new luxury Concours) featured GM's new Hide-A-Way wiper system. Lesser Chevelles would get that change later. The Super Sport (SS396 sport coupe, convertible, and El Camino pickup) became series on its own. Chevrolet produced 60,499 SS 396 sport coupes, 2,286 convertibles, and 5,190 El Caminos; 1968 was the only year the El Camino body style would get its own SS396 series designation (13880). Black-accented Super Sports rode F70x14 red-stripe tires and carried a standard 325-horsepower 396-cubic-inch Turbo-Jet V8 engine below the special twin-domed hood; 350 and 375-horsepower 396 engines could be substituted at additional cost. The SS 396 sport coupe started at $2,899 - or $236 more than a comparable Malibu with its 307-cubic-inch V8. All-vinyl bucket seats and a console were optional. Three luxury Concours options became available in March 1968 for the 4-door sedan, the 4-door sport sedan and consisted of special sound insulation, and a deep-padded instrument panel with simulated woodgrain accents and all-vinyl color-keyed interiors. These Concours options (ZK5, ZK6, and ZK7) should not be confused with the two Concours station wagons. Also new for 1968 was the elimination of the term "sedan" for the 2-door pillar body style. This was now called a coupe (or pillar coupe) while the 2-door hardtop remained a sport coupe. These coupe/sport coupe designations would continue into 1969 as well. The Concours Estate Wagon was one of four distinct Chevelle wagon models. A one-year Nomad, Nomad Custom was offered. Regular Chevelle engines started with a 140 horsepower (100 kW) Turbo-Thrift six or the new 200 horsepower (150 kW) Turbo-Fire 307 V8, but stretched to a 325 horsepower (242 kW) version of the 327-cubic-inch V8. Manual transmission cars got GM's "Air Injection Reactor (A.I.R)" smog pump, which added complexity under the hood. New Federal safety-mandated equipment included side marker lights, as well as shoulder belts for outboard front seat occupants on cars built after December 1, 1967. There were 1968 SS427 chevelles sold on Indian Reservation's territory to bypass the GM rules that prevented a car from having more than 1 H.P. per 10 pounds of weight limit (exception was the Corvette).
In 1970, sheetmetal revisions gave the bodies a more squared-up stance following the coke bottle styling, interiors were also redesigned too. The 1970 Chevelle shared many sheet metal body parts with the 1970 Buick Skylark GSX, both are GM automobiles and have interchangeable sheet metal. They're also the only 2 high performance muscle cars to share the same roofline. The 1970 Chevelle came in sport coupe, sport sedan, convertible, four-door sedan, a couple of wagons, and coupé utility (the El Camino) body styles. Only 3 of these (Malibu sport coupe, Malibu convertible and El Camino pickup) were available with a choice of one of 2 SS options; RPO Z25 with the SS 396 (402 cid) engine and RPO Z15 with the new 454 cid engine. The base model was now simply called Chevelle (which causes confusion) in lieu of the former base 300 Deluxe, and was only as a Sport Coupe or four-door sedan. Up in Canada however, the base series retained its 300 Deluxe name, with appropriate badging on each front fender just behind the front wheel well. The hardtop, convertible, and sedan received the upgraded sheetmetal but the station wagons and El Camino retained the previous year sheetmetal panels (which went on for the next 2 model years).
Station wagons were the entry level Nomad, the Chevelle level Greenbrier, the Malibu level Concours and an upscale Concours Estate. New options included power door locks and a stalk-mounted wiper control. Engine choices ranged from the standard 155 horsepower (116 kW) six-cylinder and 200-horsepower 307-cubic-inch V8, to a pair of 350 V8s and a pair of 402 engines. RPO Z25 SS equipment option included one of these 402 cid engines but was still marketed as a 396. The second 402 cid engine was available under RPO, rated at 330 hp with single exhaust, and was available in any V8 series except an SS optioned Malibu or El Camino. 1970 also saw the introduction of the 454 cid engine and was only available with the RPO Z15 SS Equipment option. The base 454 cid engine was rated at 360 hp (which was also available with cowl induction) and the optional LS6 version at 450 hp. There were 4,475 LS6 Chevelles produced, of which 137 are currently registered on the National Chevelle LS6 Registry.
The SS 396 Chevelle included a 350 horsepower (260 kW) Turbo-Jet 396 V8, special suspension, "power dome" hood, black-accented grille, resilient rear-bumper insert, and wide-oval tires on sport wheels. Though a 375 horsepower (280 kW) cowl induction version was available, few were sold in favor of the newly introduced 454 engine in the October/November 1969 timeframe. The LS5 454-cubic-inch V8 produced 360 horsepower (270 kW) in standard form and a cowl induction version was also available. The LS6 produced a claimed 450 gross HP in solid-lifter, high-compression guise. It has been suggested that the LS6 was substantially "under-rated" and actually produced something on the order of 500 horsepower (370 kW) as delivered from the factory. Recent engine dyno tests have proven that the 1970 LS-6 engine makes over 450 hp and 500 lb/ft torque in stock configuration (stock compression ratio, stock camshaft, stock intake and exhaust manifolds). Super Chevy Magazine conducted a chassis dyno test of a supposed production-line stock 1970 Chevelle and recorded 282 peak HP at the wheels. This test that was not done under SAE standards. The engine was said to be correct but is not confirmed. Current 1/4 mile times and MPH of a 1970 Chevelle equipped with 100% factory stock LS-6 engines and modern tires are turning very low 12 second times (13.07) with trap speeds of 112+ mph.
"You can make our tough one even tougher," the brochure explained, by adding Cowl Induction to either the SS 396 or the SS 454. Step on the gas, and a scoop opened "to shoot an extra breath of cool air into the engine air intake....like second wind to a distance runner." Neither functional hood lock pins nor hood and deck stripes were standard with either SS option, but were part of the optional ZL2 cowl induction hood option. The 454 cu in (7.4 L) LS5 V8 was rated at 360 hp (270 kW).

Technical data:
- engine: V8
- capacity: 5700 cc
- horsepower: 175 HP
- gearbox: 3+1
- top speed: 180 km/h