MiniAutoHobby: Hachette

Pokazywanie postów oznaczonych etykietą Hachette. Pokaż wszystkie posty

IFA W50LA

Friday 27 December 2019
This is a firefighting version of the vehicle described here.

Technical data:
- engine: 4 cylinders
- capacity: 6500 cc
- horsepower: 125 HP
- gearbox: 5+1
- top speed: 80 km/h

Sunday 24 January 2016
Thе GMC CCKW was a 2½ ton 6×6 U.S. Army cargo truck that saw heavy service in both World War II and the Korean War. The original "Deuce and a Half", it formed the backbone of the famed Red Ball Express that kept Allied armies supplied as they pushed eastward after the Normandy invasion.
The CCKW came in many variants, including open or closed cab, long wheel base (LWB 353) and short (SWB 352), and over a score of specialized models. It began to be phased out with the deployment of the 6×6 M35 in 1950, but remained in active U.S. service until the mid-1960s.
In 1940, the US Army set a requirement for an all wheel drive 6×6 truck with a 12 ft (3.7 m) cargo area and a 2½ ton (2,268 kg) off-road payload. General Motors, already supplying modified commercial trucks to the Army, modified the 1939 ACKWX-built for the French Army-into the CCKW. The General Motors design was chosen by the Army and went into production at GM'S Yellow Truck and Coach division's Pontiac, Michigan plant alongside 6×4 CCWs. Later they were also manufactured at GM's St. Louis, Missouri Chevrolet plant.
Initially, all versions used a modified commercial closed cab design having a metal roof and doors. By 1944 an open cab version, with a canvas roof and doors, was used. This was easier to build, and the roof could be removed to lower the shipping height. 1 in 4 open cabs had a machine gun mounting ring above the co-driver's position.
The CCKW provided a platform for the widest range of bodies on any U.S. military vehicle, with the 12 ft (3.7 m) cargo version being the most common. As steel was more heavily rationed during the course of the war, the steel cargo bed was replaced by a wooden one. Wooden beds proved unsatisfactory and a 'composite' bed with steel sides, framing, and wooden bottom slats was developed. However, the composite bed was still unsatisfactory and the bed design returned to all steel.
A rectangular van configuration was used in communications, medical, workshop, and many other specialty roles.

Technical data:
- engine: 6 cylinders
- capacity: 4400 cc
- horsepower: 91 HP
- gearbox: 5+1
- top speed: 72 km/h

Simca 1100 Fourgon

Sunday 20 September 2015
The 1100 was the result of "Project 928", started in 1962, finalized by engineers Philippe Grundeler and Charles Scales. The design was a result of Simca's market research in the early 1960s, which showed the increasing popularity of front wheel drive cars that provided better utilization of space and comfort in small cars. In Spring 1962, Simca organized a 1966–67 launch of a new range of front wheel drive cars with saloons, estates cars and light commercial vehicles to be included, all fitting into France's 6CV tax class – between the Simca Mille and Simca 1300. Both transverse and longitudinal engine placement were tested, and in 1963 the transverse-engine design was approved. The Simca 1100 was one of the first designs outside Fiat to feature a transverse engine with an end-on gearbox and unequal length driveshafts (now near-universal amongst small cars), a possible result of Fiat influence as a major shareholder.
In 1963, Chrysler took a controlling interest in Simca, approving the project in 1964, with a production target of summer 1967. The short timetable included developing a new transmission, and using a larger version of the rear engined rear wheel drive Simca Mille (Simca 1000) "Poissy engine", displacing 1118 cc (the Mille used a 1.0 litre engine, the 1500 a 1.5 litre engine).
During the first full year of production 1968, volumes were already strong with 138,242 vehicles made. Importantly, incremental sales appeared to come mostly from competitor manufacturers, since overall Simca production surged from 251,056 cars in 1967 to 350,083 in 1968, and volumes for the slightly smaller Simca 1000 were virtually identical in each of these two years.
Production peaked in 1973, with nearly 300,000 Simca 1100s rolling off the assembly line. However, production fell rapidly through 1977, when over 142,000 1100s were made, and in 1978 (with the Chrysler Horizon launched in February 1978), just half that number (72,695) of Simca 1100s was made. Volumes dwindled to below 20,000 in 1981 which was the last year of production in France, though in Spain production continued through to 1982 of the car and 1985 for the van version.